Propane Fuel Filter Replacement - JLG 800AJ HC3 Operation & Safety Manual

7.8

PROPANE FUEL FILTER REPLACEMENT

1. Electric Lock Off Solenoid
2. Housing Seal
3. Filter Magnet
4. Filter Housing
7.8.1 Removal
1. Relieve the propane fuel system pressure. Refer to Propane Fuel System Pressure
Relief.
2. Disconnect the negative battery cable.
3. Slowly loosen the Filter housing and remove it.
4. Pull the filter housing from the Electric lock off assembly.
5. Remove the filter from the housing.
6. Locate Filter magnet and remove it.
7. Remove and discard the housing seal.
8. If equipped, remove and discard the retaining bolt seal.
9. Remove and discard mounting plate to lock off O-ring seal.
800AJ HC3
General Specifications and Operator Maintenance
1
10
2
3
4
Figure 46. Filter Lock Assembly
5. Electrical Connector
6. Fuel Outlet
7. O-ring
6
7
8
BM000150A
9
8. Filter
9. Fuel Inlet
10. Ring
31222411
5
151