Table of Contents
Advertisement
User Responsibilities, Machine Preparation, and Inspection
10. Accessories/Attachments — Refer to the Accessories section in this manual or
accessory installed upon the machine for specific inspection, operation, and
maintenance instructions.
11. Function Check — Once the Walk-Around Inspection is complete, perform a
functional check of all systems in an area free of overhead and ground level
obstructions. Refer to
12. Platform Gate — Keep gate and surrounding area clean and unobstructed. Verify
the gate closes properly and is not bent or damaged. Keep gate closed at all times
except when entering/exiting the platform and loading/unloading materials.
13. Lanyard Attach Points — During operation, occupants in the platform must wear
a full body harness with a lanyard attached to an authorized lanyard anchorage
point. Attach only one (1) lanyard per lanyard anchorage point.
If the machine does not operate properly, turn off the machine immediately! Report
the problem to the proper maintenance personnel. Do not operate the machine
until it is declared safe for operation.
2.5
WALK-AROUND INSPECTION
6
6
7
10
30
Section — Machine Operation
WARNING
9
14
8
7
7
11
8
9
7
31222411
17
21
15
12
13
20
14
19
18
3
5
4
7
2
for more specific instructions.
9
8
7
22
10
7
16
8
9
OAC014170
1
6
800AJ HC3
Advertisement
Table of Contents
