JLG 800AJ HC3 Operation & Safety Manual page 38

User Responsibilities, Machine Preparation, and Inspection
3. From the platform control console:
a. Ensure that the control console is firmly secured in the proper location.
b. Check that all guards protecting the switches or locks are in place.
c. Ensure that all machine functions are disabled when the Emergency Stop
Button is pushed in.
d. Ensure that all machine functions stop when the footswitch is released.
e. Operate all functions and ensure proper operation.
4. With the platform in the stowed position:
a. Drive the machine on a grade, not to exceed the rated gradeability, and stop
to ensure the brakes hold.
b. Check that the tilt indicator is illuminated to ensure proper operation.
5. Swing the boom over either of the rear tires and ensure that the Drive Orientation
indicator illuminates and that the Drive Orientation Override switch must be used
for the drive function to operate.
6. With the machine positioned on a smooth, firm surface within the limits of the
maximum operating slope, elevate the boom above 4 degrees of horizontal.
Select high speed drive mode. Carefully attempt to drive and ensure the drive
speed is reduced.
38
31222411 800AJ HC3