Safety Devices; Noise And Vibration; Device Overview; Accessories - GARANT GMT35 Instruction Manual
Hide thumbs
Also See for GMT35:
- Instruction handbook manual (324 pages) ,
- Instruction handbook manual (196 pages)
Table of Contents
Advertisement
Available languages
Available languages
Maintenance [} Page 31]
The operating company must ensure that personnel who work on
the product comply with the regulations and provisions together
with the following instructions:
National and regional regulations for safety, accident preven-
tion and environmental protection regulations.
No damaged products are assembled, installed or commis-
sioned.
The necessary protective equipment is provided.
Instruct and train operators in the use of the machine.
Clearly specify personnel responsible for the various activities
and check compliance.
Ensure limit values are not exceeded.
Regularly test safety devices for correct operation.
3.7.
SAFETY DEVICES
Do not use the machine if it is damaged or the safety devices
are not operational.
Before using the unit, always test the safety devices for correct
operation.
In the event of unusual behaviour or hazardous situations,
press the emergency stop switch immediately and report the
matter to a responsible person.
After the emergency stop switch has been actuated, secure the
unit against being switched back on inadvertently until the
fault has been rectified.
After maintenance, cleaning or other activities, reactivate the
safety devices and test them for correct operation
Do not remove, modify and bypass the safety devices.
3.8.
NOISE AND VIBRATION
i
The noise level generated is dependent on factors such as
the material and size of the workpiece, and the material of the
abrasive,
the sieve used,
and the finishing process concerned.
When the noise-absorption hood and the trough cover are both
open, the noise level can rise to a value in excess of 79 dB. As far
as possible, always keep the covers closed (this reduces the noise
by up to 10 dB). In particular when performing separation (94 dB),
hearing protection must be worn.
Abrasive process:
Noise-absorption hood and the trough
cover closed
Abrasive process:
Noise-absorption hood and the trough
cover open
Separation process:
Noise-absorption hood and the trough
cover open
* Information on measurement conditions:
Abrasive materials cylinder 15x30 mm
Motor speed 3000 rpm
4.
Device overview
4.1.
ACCESSORIES
item
Quantity
Sieve
3
Emission sound pres-
sure with abrasive ma-
terial and workpiece *
72 dB ± 2 dB
79 dB ± 3 dB
94 dB ± 3 dB
item
Quantity
Aluminium di-
1
viding wall
item
Quantity
Scoop
1
Measuring jug
2
Plastic insert for
2
dividing wall
i
Transport trolley only for Article no.: 501305.
4.2.
SURFACE FINISHING MACHINE
1
2
3
4 5
18
17
16
15
1 Separation unit cover
2 Trough
3 Trough cover
4 Dividing wall
5 Nozzles
6 Noise-absorption hood
7 Display screen
8 Handle
9 Fuse box
4.3.
WATER TANK
1
2
1 Filter
2 Collection tank
3 Suction unit
item
Quantity
Plastic dividing
1
wall
Restraint
2
-
-
6
7
8
9
10
11
12
13
14
10 Emergency stop button
11 Main switch
12 Indicator lamp
13 Castors with parking
brakes
14 Water tank
15 Castors
16 Sieve
17 Trough outlet
18 Level indicator
3 4
5
4 Float
5 Drain valve
www.hoffmann-group.com
de
en
cs
da
es
fr
hr
hu
it
nl
pl
ro
sl
25
Advertisement
Chapters
Table of Contents
