System Adjustment; System - Interfaces - Thermo Scientific STANDARD Series Manual

System - Adjustment

System Adjustment

low reservoir fluid level warning message and enable/disable the energy saving feature.
1. Use the arrow buttons to highlight
SP1
Editor
Settings
System
Installation
Adjustment
3. With
to display the options.
Pump Adjustment
Level Sensor Settings
Energy Saving
Menu
Pump Adjustment
Level Sensor Settings
Energy Saving
Menu
Pump Adjustment
Level Sensor Settings
Energy Saving
Menu
The Energy Saving mode is primarily designed for applications running under a stable load. Enabling
the mode saves energy by reducing the unit's heater power requirements. This can result in substantial
energy savings over the life of the unit.

System - Interfaces

System Interfaces
ON OFF
Protocol or . This feature is optional on the SC 150 and SC 150L thermostats. For additional
information refer to the Appendix.
Thermo Scientific
is used to view/adjust the thermostat's pump speed, and enable/disable the
System
Menu
highlighted, press
is used to view the serial communications baud rate (19200) or turn the Namur
2. Press to display the submenu.
.
Adjustment
Interfaces
4. Highlight the desired feature and press
to view/change the setting.
Stage 1 (LOW)
Stage 2 (HIGH)
Low Level Warning
OFF
disables the low level warning message,
see Section 6, SC 150 only.
Energy Saving
Section 4 Operation
Menu
Menu
OFF
Menu
ON
Menu
4-13