Event Settings; Alarms; Motion Detection; Rule Settings - avertX HD354IR User Manual

EVENT SETTINGS

ALARMS

You can schedule alarm reporting and set actions that can be triggered by other devices so that
alarms and the triggered actions can be handled in time.
Alarm reporting can be scheduled for a motion detection alarm.

MOTION DETECTION

RULE SETTINGS

Motion detection detects the object motion in a specified rectangular area during a period. You need
to set a detection area, sensitivity of detection, object size, and history for the camera to decide
whether to report a motion detection alarm when it detects motion.
1. Click Setup > Event Settings > Alarms. Select the Rule Settings tab.
2. In the Detection Mode: Area image, click
detection area, click
3. Click and drag the mouse to set a detection area.
4. Set the detection Sensitivity and Object Size for the camera to decide whether to report a
motion detection alarm.
Moving the slider to the right increases detection sensitivity. When the extent of motion
•
within the detection area exceeds the set object size, the camera reports an alarm.
Object Size specifies the minimum ratio of the object's size to the size of the total
•
detection area before an alarm will be reported. That is to say, to detect motion of tiny
objects, you need to draw a small box (detection area) in the actual motion area
accordingly.
44
to add a new detection area. To delete a
.