Table of Contents
Advertisement
Chapter 2 Preparations
Installation
Follow the steps below to install a DIMM.
See steps 1 to 7 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
For the 3.5-inch drive model, if the mid-plane drive cage is attached, it must be removed.
Open levers on left and right sides of DIMM slot.
Push the DIMM straight into the slot.
When a DIMM is inserted into the slot, the lever automatically closes.
Notch
Continue to install/remove the internal options.
See Chapter 2 (1.33 Attaching the air baffle) to attach the air baffle.
Refer to Chapter 2 (1.34 Installing Top Cover) in this manual to replace the top cover of the server.
Make sure the orientation of the DIMM. The DIMM has a notch, preventing
Important
being incorrectly inserted.
Do not apply too much pressure when you push a DIMM into the slot. Doing
so can damage the socket or terminal part.
Note
In order to prevent damage of the system due to improper cooling or elevated
temperature, please do not activate the server or enclosure without implementing
any of component or blank on all of drive bays and device bays.
Express5800/R120h-2M (3rd-Gen) User's Guide
1. Installing Internal Optional Devices
87
Advertisement
Table of Contents
