Chapter 2 Preparations
1.29
4x 3.5-inch Mid-plane Drive Cage N8154-100
The server can be added with a 4x 3.5-inch mid drive cage in its inside. When installing a mid drive cage, all
equipped possible drive cages have to be installed in the front bay and the rear bay.
Installation
Please prepare the following before installing the options.
Parts included in the option kit
The option must be attached under the following conditions.
A 1U heat sink is required to attach this option. Attach the 1U heat sink before attaching the mid-plane drive
cage.
If you would like to attach a TPM, attach the TPM before attaching the mid-plane drive cage.
If you would like to attach a Type-a (mezzanine type AROC) RAID controller, attach the controller before
attaching the mid-plane drive cage.
To install the components, follow these steps.
1.
See steps 1 to 7 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
Express5800/R120h-2M (3rd-Gen) User's Guide
1. Installing Internal Optional Devices
175