Table of Contents
Advertisement
Chapter 2 Preparations
6.
Fit the terminal of riser card of the rear drive cage to the slot on the mother board and insert the terminal
firmly into the slot. Then fix the riser card. Next, raise the screw handle at the top of the cage and turn the
handle to the right 180 degrees to fix the cage. Then put down the screw handle as before.
7.
Connect the power cord and the data cable of the backplane of rear drive cage.
・Connecting the primary drive cage backplane with SAS expander.
・Connecting the secondary drive cage backplane with SAS expander.
8.
Attach a drive or a dummy tray.
166
Express5800/R120h-2M (3rd-Gen) User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
