Connection - NEC N8100-2836F User Manual

Chapter 2 Preparations
2.2

Connection

Connect peripheral devices to the server.
Connectors that allow a variety of peripheral devices to be connected are provided at the front and rear of the
server. Images on the following pages show the peripheral devices that can be connected in their standard state
and their respective connector positions.
Be sure to observe the following precautions to use the server safety. Failure to observe the
precautions may cause death or serious injury. For details, refer to Safety Precautions and
Regulatory Notices.


Be sure to observe the following precautions to use the server safely. Failure to observe the
precautions may cause burns, injury, and property damage. For details, refer to Safety Precautions
and Regulatory Notices.






222
Do not hold the power plug with wet hands
Do not connect the ground wire to a gas pipe
Use only the specified outlet to insert.
Do not connect the power cord to an outlet that has an illegal number of connections.
Insert the power plug into the outlet as far as it goes.
Use only the specified power cord
Do not connect or disconnect the interface cable with the power plugged in the outlet.
Use only the specified interface cable
Express5800/R120h-2M (3rd-Gen) User's Guide
WARNING
CAUTION
2. Installation and Connection