Table of Contents
Advertisement
Chapter 2 Preparations
11. Align the terminal part of the riser card with the slot part on the motherboard and insert them securely. Then,
install the GPU mounted riser card.
Next, raise the screw handle at the top of cage and turn the handle to the right 180 degrees to fix the cage.
Then put down the screw handle as before.
12. Slide the retaining clip to the lock side.
13. See Chapter 2 (1.34 Installing Top Cover) to attach the top cover of the server.
14. Please see Chapter 2 (2 Installation and Connection) in this manual to conduct installation and connection,
and turn the power supply ON.
Removal
The procedure for removal is the reverse of installation.
Re-attach the blank cover if you operate without it attached.
Note
In order to prevent damage of the system due to improper cooling or elevated
temperature, please do not activate the server or enclosure without implementing
any of component or blank on all of drive bays and device bays.
Important
Re-attach the blank cover removed to maintain the internal cooling.
Express5800/R120h-2M (3rd-Gen) User's Guide
1. Installing Internal Optional Devices
129
Advertisement
Table of Contents
