Table of Contents
Advertisement
Removing a 9.5 mm slim optical drive
IMPORTANT:
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Disconnect the power cable (1) and data cable (2) from the rear of the optical drive.
IMPORTANT:
damaging the cable.
4.
Push the green release latch on the right rear side of the drive toward the center of the drive (1), and then
slide the drive forward and out of the bay (2).
32
Chapter 4 Removal and replacement procedures
Take out all removable media from a drive before removing the drive from the computer.
(Access panel on page
When removing the cables, pull the tab or connector instead of the cable itself to avoid
(Preparation for disassembly on page
18).
17).
Advertisement
Table of Contents
