Table of Contents
Advertisement
Changing from desktop to tower orientation
The Small Form Factor computer can be used in a tower orientation with an optional tower stand that can be
purchased from HP.
NOTE:
To stabilize the computer in a tower orientation, HP recommends the use of the optional tower stand.
1.
Prepare the computer for disassembly
2.
Orient the computer so that its right side is facing up and place the computer in the optional stand.
3.
Reconnect the power cord and any external devices, and then turn on the computer.
NOTE:
free of obstructions.
4.
Lock any security devices that were disengaged when the access panel was removed.
56
Chapter 4 Removal and replacement procedures
Ensure at least 10.2 centimeters (4 inches) of space on all sides of the computer remains clear and
(Preparation for disassembly on page
17).
Advertisement
Table of Contents
Need help?
Do you have a question about the ProDesk 405 G4 Small Form Factor and is the answer not in the manual?