Removing a 9.5 mm slim optical drive
IMPORTANT:
computer.
Before removing the optical drive, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the access panel
Remove the optical drive:
1.
Disconnect the power cable (1) and data cable (2) from the rear of the optical drive.
IMPORTANT:
damaging the cable.
36
Chapter 4 Removal and replacement procedures
All removable media should be taken out of a drive before removing the drive from the
(Access panel on page
When removing the cables, pull the tab or connector instead of the cable itself to avoid
(Preparation for disassembly on page
23).
20).