Removing A 9.5 Mm Slim Optical Drive - HP EliteDesk 880 G4 TWR Maintenance And Service Manual

6. Slide the drive into the drive bay, making sure to align the mounting screws with the mounting slots,
until the drive snaps into place.
7. Connect the power cable (1) and data cable (2) to the rear of the optical drive.
8. Connect the opposite end of the data cable to one of the light-blue SATA connectors on the system
board.
NOTE:
connectors.
9. Reassemble the computer.

Removing a 9.5 mm slim optical drive

CAUTION: All removable media should be taken out of a drive before removing the drive from the computer.
1. Prepare the computer for disassembly
2. Remove the access panel
Refer to System board connections on page 24
(Access panel on page
for an illustration of the system board drive
(Preparation for disassembly on page
19)
18)
Drives 33