Country-Specific Requirements - HP ProDesk 405 G4 Small Form Factor Maintenance And Service Manual

Country-specific requirements

Additional country-specific requirements are shown in parentheses and explained in the following table:
Country
Australia (1)
Austria (1)
Belgium (1)
Canada (2)
Denmark (1)
Finland (1)
France (1)
Germany (1)
1. The flexible cord must be Type HO5VV-F, 3 conductor, 0.75 mm
plug) must bear the certification mark of the agency responsible for evaluation in the country where it will be used.
2. The flexible cord must be Type SVT or equivalent, No. 18 AWG, 3 conductor. The wall plug must be a two-pole grounding type with a
NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3. Appliance coupler, flexible cord, and wall plug must bear a "T" mark and registration number in accordance with the Japanese
Dentori Law. Flexible cord must be Type VCT or VCTF, 3 conductor, 0.75 mm
grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V) configuration.
122 Appendix B Power cord set requirements
Accrediting Agency
EANSW
OVE
CEBC
CSA
DEMKO
SETI
UTE
VDE
Country
Italy (1)
Japan (3)
Norway (1)
Sweden (1)
Switzerland (1)
United Kingdom (1)
United States (2)
2 conductor size. Power cord set fittings (appliance coupler and wall
2 conductor size. Wall plug must be a two-pole
Accrediting Agency
IMQ
METI
NEMKO
SEMKO
SEV
BSI
UL