7.
Connect the power cable (1) and data cable (2) to the rear of the optical drive.
8.
Connect the opposite end of the data cable to one of the light-blue SATA connectors on the system
board.
NOTE:
connectors.
9.
Reassemble the computer.
Removing a 9.5 mm slim optical drive
CAUTION:
1.
Prepare the computer for disassembly
2.
Remove the access panel
42
Chapter 4 Removal and replacement procedures
Refer to
System board connections on page 25
All removable media should be taken out of a drive before removing the drive from the computer.
(Access panel on page
for an illustration of the system board drive
(Preparation for disassembly on page
18)
17)