Download Print this page
HP ProDesk 405 G2 Product End-Of-Life Disassembly Instructions

HP ProDesk 405 G2 Product End-Of-Life Disassembly Instructions

Business pc
Hide thumbs Also See for ProDesk 405 G2:

Advertisement

Quick Links

Product End-of-Life Disassembly Instr uctions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
HP ProDesk 405 G2 MT Business PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Power cord
Cooler fan 84g,system fan 92g,PSU fan 63.5g
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
2
1
6
1
239.5g
Page 1

Advertisement

loading

Summary of Contents for HP ProDesk 405 G2

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.
  • Page 3 Figure1 Release Thumb screw on the access panel. Figure2 Griping the tab at the end of access panel, pull towards the rear and remove from unit. Figure3 Pull 3 pcs bezel hooks and remove the front bezel Figure4 Disconnect the SATA and power cables from from chassis.
  • Page 4 Figure7 Push the latch and release the Slim ODD. Figure8 Remove the Slim ODD form chassis. Figure9 Unplug all cable conn. from PCA. Figure10 Release 6 pcs screws from PCA Figure11 Remove PCA from chassis Figure12 Push the hooks on both sides and then pick up the memory EL-MF877-00 Page 4...
  • Page 5 Figure13 Unplug the cooler cable from PCA Figure14 Release 4 screws from cooler and remove it Figure15 Remove the battery from the PCA Figure16 Release the screw of the FIO cable Figure17 Push the plastic hook and rotation the FIO Figure18 Release the SD card reader screw module inside.
  • Page 6 EL-MF877-00 Page 6 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 7 Figure19 Remove the SD Card reader from chassis Figure20 Release two screws of speaker Figure21 Remove the speaker form chassis Figure22 Release 4 pcs screws of PSU and remove it Figure23 Pull up the PSU and remove it Figure24 Cut the cable tie EL-MF877-00 Page 7 Template Revision B...
  • Page 8 Figure25 Remove screw for bottom Figure26 Remove screw for top Figure27 Remove FG screw Figure28 Disconnect fan connector Figure29 Cut the cable tie Figure30 Remove LED EL-MF877-00 Page 8 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 9 Figure31 Remove plastic cover Figure32 Remove PCB screw Figure33 Remove AC inlet , select switch screw Figure34 Cut output cable, AC inlet wire, LED wire Figure35 Remove capacitors use solder iron Figure36 Heat the solder of Electrolytic Capacitors greater than 2.5cm in diameter or height and remove it. -Acbel (Crasto-S 180W E-Star EL-MF877-00...
  • Page 10 Figure37 Heat the solder of Electrolytic Capacitors Figure38 Heat the solder of Electrolytic Capacitors greater than 2.5cm in diameter or height and remove it. greater than 2.5cm in diameter or height and remove it. (C801 ,C951)(Crasto-S 180W E*6 PSU-Delta) (C801,C802,C951,C303) (Crasto-S 180W REG PSU- Delta) Figure39 Heat the solder of Electrolytic Capacitors Figure40 Heat the solder of Electrolytic Capacitors...