Table of Contents
Advertisement
b.
To insert the new battery, slide one edge of the replacement battery under the holder's lip with
the positive side up (1). Push the other edge down until the clamp snaps over the other edge of
the battery (2).
Type 3
a.
Pull back on the clip (1) that is holding the battery in place, and remove the battery (2).
b.
Insert the new battery and position the clip back into place.
NOTE:
After the battery has been replaced, use the following steps to complete this procedure.
8.
Replace the computer access panel.
9.
Plug in the computer and turn on power to the computer.
119
Advertisement
Table of Contents
Need help?
Do you have a question about the ProDesk 405 G4 Small Form Factor and is the answer not in the manual?