Safety - General Instructions - Fayat Group DYNAPAC CA25 Instruction Manual

1. Read and understand this Manual before starting and operating the machine. The
operator should be fully familiar with the equipment before running it.
2. Follow and observe all instructions on regular lubrication and maintenance in the
Maintenance Section.
3. Only trained and/or experienced operators are to operate the roller. Passenger are
not permitted on the roller. Remain seated at all times when operating the roller
4. Do not operate the machine if it needs repairs or adjustments.
5. Only mount and discount the roller when it is stationery. Use the intended
footsteps, grip & rails. Always use the three point grip (both feet and one hand, or
one foot and both hands) when mounting or dismounting the machine. Never jump
down from the machine.
6. If the terrain stability conditions are abnormal or dangerous, use the Rollover
Protection Structure (ROPS). Always use a ROPS seat belt.
7. Drive slowly in sharp bends.
8. Avoid driving across slopes. Drive Straight up or straight down the slope.
9. When operating the machine near edges or holes, make sure that at least 2/3 of
the machine width is on compacted materials.
10. Make sure that there are no obstacles in the direction of travel, both on the ground,
and in front, behind, or on top of the roller.
11. Drive extra carefully on uneven ground.
12. Use the safety equipment provided. The seat belt must be worn on machines fitted
with ROPS & Cab.
13. Keep machine clean. Immediately remove any type of dirt or grease accumulated
on the operator's platform, all signs and decals.
14. Safety measures before refuelling:
- Stop the engine;
- Do not smoke;
- Do not allow sparks or flames next to the machine;
- Earth the filling equipment nozzle to the tank operating to avoid sparks.
12
Safety – General instructions

Safety - General instructions

(Also read the safety manual)
4812331840EN 10-03-2022