Fayat Group DYNAPAC CA25 Instruction Manual page 45

Below graphic applicable for new coloured display from machine sr. no E010243
Fig. Start screen
Fig. Transport mode
10-03-2022
Machine Description – Instruments/Controls
Functional Description – Display
When the ignition key is activated to position 1, the start screen
appears on the display (Fig. 1). This is shown for a two seconds
and then switches over to the status screen.
Transport mode
The transport mode menu is shown when one of the three
function keys to the right on the display is activated.
The status screening provides information about travel direction
(2), Hour meter (3) and fuel level (4).
Direction of work
The icon has three options (F, N, R) and is located in the top left
corner of the Display (2).
 N (Neutral) – Indicates that the lever is in Neutral position.
 F (Forwards) – A left arrow is shown in front of "F" on the
display.
 R (Reverse) – A right arrow is shown after "R" on the
display.
Hour meter
An icon (hour-glass) is shown on the left-hand side of the display
for machine hours. The number of hours is shown to the right of
the icon (3).
Fuel level
The fuel level is indicated as a no of lines of on the bar to the
right of the display.
Once the first fuel bar is reached (bottom to top), it means the
system has 10% of its total capacity, and the warning LED lights
glow, indicating that you should refuel (5).
4812331840EN 45