Operation - Vibration; Vibration Switch; Vibration - Activation - Fayat Group DYNAPAC CA25 Instruction Manual

Fig. Control panel:
8. Amplitude switch.
5
Fig. Forward/reverse lever;
3.

Vibration switch.

5. Forward/reverse lever.
10-03-2022
Operation – Vibration
8
Vibration switch
To activate or deactivate the vibration, activate the high or
low amplitude selector (8).
The operator should activate it using the vibration switch,
located under the forward/reverse lever (5).
Vibration – Activation
Never activate vibration when the machine is
stationary. This can damage both the surface
and the machine.
Engage and disengage vibration using the switch (3) on
the underside of the forward/reverse lever (5).
The vibration should be activated only at high or low speed.
3
Always switch off vibration before the machine comes to a
standstill.
4812331840EN

Operation - Vibration

61