ETC Foundation HD Setup Manual

ETC Setup Guide
Foundation® Rigging Controller

Introduction

The Foundation HD and Foundation Desk rigging controllers provides you with ability to control your
rigging system. The Foundation HD is mounted on the wall and is meant as a stationary control center,
whereas the Foundation Desk provides a portable station that you can use to move around your facility.
You can connect the Foundation Desk to any of the Foundation Power Supply stations that you have
installed, giving you flexibility to control all the motors in your system from multiple connection points.
This document will provide you with a physical specification of your controller along with basic instructions
on how to power up the controller and access the Help system on the controller.
Corporate Headquarters
London, UK
Rome, IT
Holzkirchen, DE
Hong Kong
Web:
Product information and specifications subject to change. ETC intends this document to be provided in its entirety.
8062M2200
Middleton, WI, USA

Tel +44 (0)20 8896 1000 Service: (UK)
 
Tel +39 (06) 32 111 683 Service: (UK)
 
Tel +49 (80 24) 47 00-0

Tel +852 2799 1220 Service: (Asia)
 
etcconnect.com © 2018 Electronic Theatre Controls, Inc.

Rev B Released 2018-02
 
Tel +608 831 4116 Service: (Americas)
 
service@etceurope.com
service@etceurope.com
Service: (DE) techserv-hoki@etcconnect.com

service@etcasia.com
service@etcconnect.com