ETC QuickTouch+ Mk2 User Manual page 8

WARNING:
switches/buttons connected and in position.
WARNING:
performed by competent or qualified persons.
WARNING:
trained specialist has inspected the equipment.
WARNING:
regular inspection.
WARNING:
than specified on the unit and in this manual.
WARNING:
told to do so by the manufacturer.
WARNING:
components and functionalities outside the limits provided in this manual, or
without the written authorization of the manufacturer.
WARNING:
system is connected to a power source, even if the QuickTouch+ Mk2 itself is
not powered on. Doing so can result in damage to the product and is a
health hazard.
WARNING:
button) in any other way than described in this manual. The hold-to-run
control button should always be under manual operator control.
WARNING:
100% perfect working order.
WARNING:
operating the system.
4
Do not run the system without all emergency stop
Controller installation, maintenance and disposal shall be
Do not start initial operations before a competent person or a
Do not use a QuickTouch+ Mk2 without having done the
Do not connect a QuickTouch+ Mk2 to a power source other
Do not modify a QuickTouch+ Mk2 in any way unless expressly
Do not modify the valves and adjustments of the safety
Do not open the controller or remove the outer casing if the
Do not enable the hold-to-run control button (Up or Down
Do not use a QuickTouch+ Mk2 if it does not appear to be in
Do not distract the operator's attention while they are
QuickTouch+ Mk2 User Guide