Commissioning; Safety Instructions For Operation 10.1 - Wacker Neuson AP1840 Operator's Manual

Vibration plate
Hide thumbs Also See for AP1840:
Table of Contents

Advertisement

10

Commissioning

10.1
Safety instructions for operation
[us] | 12/2020 | 5100060708 | AP | Operator's manual
WARNING
Tipping hazard due to slipping or overturning machine!
At least 2/3 of the machine must be on a stable surface near edges.
► Take the machine out of operation and lift it back onto a stable sur-
face.
WARNING
CALIFORNIA: Proposition 65 (Law of 1986 on toxic substances and
safe drinking water) Warning!
Battery terminals, clamps and similar parts contain lead and lead com-
pounds. These chemicals are considered by the State of California to be
the cause of cancer and reproductive harm.
► Wash hands after working on the battery.
CAUTION
Health hazard due to vibrations!
Physical impairments due to vibration.
► Take regular breaks.
CAUTION
Risk of collapse and spillage!
There is a risk of injury from falling or spilling when working on fracture,
pit, dump and embankment edges, on trench edges and heels.
► Pay attention to side walls and their stability.
► Ensure stability.
Operation on inclined surfaces
• Only approach gradients from below.
Ground conditions
The maximum dumping height depends on several factors of the ground
conditions. An exact specification of this value is not possible.
Determine the maximum fill height by compaction tests or soil sam-
ples.

Safety instructions for operation 10.1

Commissioning
41
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ap1850

Table of Contents