Inspection Before Operation; Checks With The Engine Stopped - Yale VERACITOR GCC030VX Operating Manual

Figure 11. Impact Detected Icon
To clear messages and reset truck to normal operation,
and Impact reset must be performed by either a service
technician or supervisor. See User Interface, Supervisor
2200 YRM 1130 or User Interface, Service 2200 YRM
1131 for procedures.

Inspection Before Operation

WARNING
Report damage or faulty operation immediately. Do not
operate a lift truck that needs repair. A lift truck will
only do its job when it is in proper working order. If
repairs are required, install a tag in the operator's area
stating "DO NOT OPERATE" and remove the key from
the key switch if truck is equipped with key switch
option.

Checks With the Engine Stopped

Inspect the lift truck before use and every eight hours or
daily as described in the Maintenance section of this
Operating Manual. Inspect more frequently if used in
severe operating conditions.
Before using the lift truck, make the following checks:
• Condition of forks, carriage, chains, header hoses, mast,
attachment, and overhead guard.
• Condition of wheels and tires.
• Seat belt fastens correctly.
• Seat is correctly fastened to its mounts. Hood is correctly
latched.
• Condition of the engine compartment. Ensure all surfa-
ces are free of oils, lubricants, fuel, and organic dusts or
Operating Procedures
67