Yale VERACITOR GCC030VX Operating Manual page 54

Model Description
Item
Item
No.
12 Direc-
tion
Con-
trol
Lever
52
Table 4. Operator Controls (See Figure 8) (Continued)
NOTE: There is a sensor in the seat that actuates an audible buzzer. If the opera-
tor leaves the seat with the key switch ON and the lever is not in NEUTRAL, the
buzzer will pulse ON and OFF for 10 seconds.
The Direction Control Lever for the transmission is on the left side of the Display
Switch Cluster. The Direction Control Lever is used on lift trucks without a pedal.
The Direction Control Lever has three positions that are indicated by three green
lights on left side of Display Switch Cluster (see Figure 7 and Table 3): FOR-
WARD, NEUTRAL (N), and REVERSE. Move the lever to one of the direction
positions for travel. The Direction Control Lever must be in the NEUTRAL (N)
position before the engine can be started. The reverse lights will be on and, if
equipped, reverse alarm will be activated when the lever is placed in the
REVERSE position.
Function