Parking - Yale VERACITOR GCC030VX Operating Manual

Table of Contents

Advertisement

Operating Procedures

Parking

The operator must never leave a lift truck in a condition so
that it can cause damage and injury. When parking the lift
truck, do the following operations:
1. Stop the lift truck and apply the parking brake. Applying
the parking brake puts the transmission in NEUTRAL when
the lift truck has a pedal.
2. Fully lower the forks or carriage. Tilt mast forward until
the tips of the forks touch the ground.
3. If equipped, move the Direction Control Lever to the
NEUTRAL position.
4. Turn the key to the OFF position to stop the engine.
5. If the lift truck must be left on an incline, put blocks on
the down hill side of the wheels so that the lift truck can not
move.
108
6. Check engine compartment, if operating in areas con-
taining combustible material, and remove foreign debris.
See FIRE HAZARD WARNING at the beginning of this
section.
7. If the lift truck is equipped with an LPG fuel system and
the lift truck is not in active use, close the fuel valve at the
tank. If the lift truck is going to be left over night or longer,
the truck must be parked outside or the LPG tank must be
removed and stored outside.
Do not park the lift truck so that it limits access to fire
aisles, stairways, and fire equipment.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents