Yale VERACITOR GCC030VX Operating Manual page 141

Maintenance Schedule
Table 8. (See Figure 18 through Figure 27) (Continued)
1000
Item 8 Hr/ 250 Hr/ 500 Hr/ 2000 Hr/ 4000 Hr/ Procedure or
Item Hr/ Specification
No. 1 Day 6 Mo 6 Mo 1 Yr 2 Yr Quantity
6 Mo
NOTE 1: Check fuel system for leaks prior to any service or maintenance activity.
NOTE 2: Heavy-duty or high-temperature operations require more frequent checks.
NOTE 3: Heavy-duty or contaminated applications will require hydraulic oil change at 2000 hours.
NOTE 4: Change engine oil and filter after the first 100 hours of operation. Change transmission oil filter after first 500 hours of operation.
NOTE 5: Recommended service intervals are based on a normal application in a clean environment. Applications involving contaminated environments
such as high levels of airborne debris (dust and waste paper); chemical or abrasive compounds; poor ground conditions; intensive usage at high perform-
ance levels; or other abnormal conditions will require more frequent servicing. At your request, your Yale dealer will advise you of the appropriate service
intervals based on an application survey.
NOTE 6: In dirty or dusty environments, replace at 1000 hours or as needed.
NOTE 7: Replace timing belt on Mazda engines every 3500 hours. Use only hour interval.
NOTE 8: Check fuel injectors at 5000 hours or 7 years.
NOTE 9: Multipurpose grease with 2 to 4% Molybdenum Disulfide.
NOTE 10: Lubricate mast every 3 months if unit has less than 1000 hours.
NOTE 11: Lubricate at first sign of visible surface rust.
NOTE 12: Do not open the air filter canister except to change the air filter element. See the Periodic Maintenance Manual for your lift truck for the correct
procedure to change air filter element.
X = Check C = Change L = Lubricate CIL = Check indicator light during operation
139