Gasoline Or Diesel Fuel; Wheels And Tires; General; How To Change A Solid Rubber Tire (Gc Series) - Yale VERACITOR GCC030VX Operating Manual

d. Frost - If the amount of LPG escaping is sufficient,
frost may appear on the fittings.

Gasoline or Diesel Fuel

WARNING
When fuel is added, keep the funnel or fuel nozzle in
contact with the metal of the fuel tank to reduce the
possibility of static electric sparks. Clean any spilled
fuel.
1. Remove the fuel cap. Make sure the fuel tank is filled
with the correct fuel for the type of engine in the lift truck.
Clean the fuel cap and make sure vent is clear.
2. Replace the fuel cap.

Wheels and Tires

General

The GC series lift trucks have solid rubber tires (often
called cushion tires) that are pressed onto the rim. The GP
series lift trucks have pneumatic tires or solid rubber tires
that look like pneumatic tires. These variations in tires also
cause a variation in the types of wheels and the disassem-
bly and assembly procedures.
How to Change a Solid Rubber Tire (GC
Series)
WARNING
The type of solid rubber tire is shown on the Name-
plate. Make sure the Nameplate is correct for the type
of tires on the lift truck.
Wheels must be changed and tires repaired by trained
personnel only.
Always wear safety glasses.
NOTE: Solid rubber tires made from softer or harder mate-
rial can be installed as optional equipment. The tread on
the solid rubber tires can be either smooth or it can have
lugs. Do not mix types of tires or tread on lift truck.
1. Raise the lift truck as described in How to Put a Lift
Truck on Blocks in this manual.
2. Remove the wheel nuts and remove the wheel from the
lift truck. Lift truck wheels are heavy.
Maintenance
173