Mounting And Dismounting; Operator Passwords - Yale VERACITOR GCC030VX Operating Manual

Table of Contents

Advertisement

messages will continue to appear on the LCD screen until
lift truck has been reset by either a supervisor or service
technician.
If lift truck is configured to start after a NO response had
been given to a checklist item, the failure will be logged into
Checklist Log and operator will be allowed to start the lift
truck.

Mounting and Dismounting

WARNING
To avoid serious injury when entering or exiting the lift
truck, ALWAYS USE 3 POINTS OF CONTACT. Maintain
contact simultaneously with two hands and one foot or
with two feet and one hand while climbing on or off the
lift truck.
Place feet carefully. Always face the lift truck when climbing
on or off. Use added care when surfaces are slippery. Keep
hands free of any obstacles such as food, beverages, or
tools.

Operator Passwords

The lift trucks covered in this manual have an optional
password feature.
The Operator Passwords are a series of five numbers.
Each of the five number digits can be the numbers 1
through 5. If enabled, the password number series must be
entered into the memory by a technician and assigned to
an operator. Remember the password. A technician can
use a personal computer (PC), connected to the vehicle, to
check as well as assign the passwords.
There are four password types used on these trucks:
• Operator: Allows operator to operate lift truck.
• Lockout Reset: Lockout will occur when an operator
incorrectly enters their password a specified number of
times. After lockout occurs the following message will
appear in the display, "Password Lockout" "Supervisor
Required." The supervisor will enter the Lockout Reset
password to unlock the system.
• Supervisor: Has all rights assigned to Operator and
Lockout Reset passwords. Can add, edit, and delete
Operator or Supervisor passwords and view all truck
diagnostic information. Allows access to truck service
parameters within preset limits.
• Service: Has all rights assigned to Operator, Lockout
Reset, and Supervisor passwords. Can add, edit, and
Operating Procedures
69

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents