Table of Contents
Advertisement
the coolant level in the coolant recovery reservoir and radi-
ator.
Make sure the coolant level is between the ADD and FULL
marks on the auxiliary coolant reservoir (See Figure 42).
The coolant will expand as it is heated and the level in the
auxiliary coolant reservoir will increase.
CAUTION
Additives may damage the cooling system. Before
using additives, contact your local Yale dealer.
If coolant is added, use the correct mixture of water and
ethylene glycol shown in the Maintenance Schedule.
WARNING
Compressed air can move particles so that they cause
injury to the user or to other personnel. Make sure that
the path of the compressed air is away from all person-
nel. Wear protective goggles or a face shield to prevent
injury to the eyes.
With the engine off, check the radiator fins. Clean the radia-
tor with compressed air or water as needed.
Check for and remove any debris on the radiator core. If
the indicator light turns on again after restarting, shut down
the lift truck and do not operate the lift truck until the prob-
lem is corrected.
1.
FILL CAP
2.
AUXILIARY COOLANT
RESERVOIR
3.
FULL MARK
Figure 42. Auxiliary Coolant Reservoir
Maintenance
4.
ADD MARK
5.
RADIATOR CAP
165
Hide quick links:
Advertisement
Table of Contents
