Starting Procedures - Yale VERACITOR GCC030VX Operating Manual

Operating Procedures
delete Operator, Supervisor, and Service passwords and
view all truck diagnostic information. Allows access to
truck service parameters within preset limits.
If the optional password feature is enabled and after the
key is moved to the ON position, or the Power ON/OFF but-
ton is pressed, the LCD screen will show the message
PASSWORD ENTRY. Use the numbered push buttons
(see Figure 6 and Table 2) to enter the five digit password
and then press the STAR (*) button to enter the password
and access main menu. If the password is entered incor-
rectly, and truck is not locked out, the message PASS-
WORD INVALID and DISABLED IN ###, with ### being
the number of attempts remaining before lockout occurs.
The number of attempts is adjustable and set by a supervi-
sor or service technician.
If the truck is locked out, the message PASSWORD LOCK-
OUT, SUPERVISOR REQUIRED is displayed. A Lockout
Reset, Supervisor, or Service password is needed to
unlock the lift truck. System power can be turned OFF,
while in lockout mode by turning key switch to OFF or
pressing the Power ON/OFF button. To reset a system
lockout that occurs while attempting to enter a password
within the on-board menu, after a correct operator pass-
word has been entered, recycle the system power. For all
70
other lockout conditions, cycling the truck power will not
reset the lockout.

Starting Procedures

Do not start or operate the lift truck,
including any of its functions or attach-
ments, from any place other than the des-
ignated operator's position.
If equipped, be sure cab door is secured
in the closed position or removed before
starting lift truck operations.
If lift truck is equipped with the optional operator presence
system, the following sequence must be followed for
engine to start:
• Operator must be in seat
• Seat belt must be fastened
• Make sure park brake is applied