Rcu General Configuration - Toptech MultiLoad II Mobile Installation Manual

Chapter 6 – MutliLoad Configuration
c. IP Mask: 255.255.255.0
d. IP Gateway: 192.168.13.31 (this should be the address of the cellular modem)
e. IP Host: 204.13.171.58 (this address should be obtained from TDS support)
4. Press Exit to return to the Configuration menu.
6.5.2 RCU G
ENERAL
1. Navigate to the RCU General Setup menu item.
2. Enter the following parameters:
a. Card Reader Type: DISABLD
b. Processing Mode:
c. Host Login: Your TDS username and password, concatenated. Obtain this information from
d. Terminal SPLC: Your terminal SPLC, a 9 digit code
e. Terminal Name: Your terminal name, a 7 digit identifier
f.
g. Carrier ID: Your carrier ID, a 4 digit code
h. TDS Retry Interval: The number of minutes between attempted to contact TDS. Default is 15
i.
j.
3. Press Exit until program mode is exited.
For more information, refer to the MultiLoad II Users Guide.
MultiLoad II Mobile Installation Guide: Version C
C
ONFIGURATION
i. CN ALL (User will be prompted for operation at time of load)
ii. CNDTL (Simple DTL)
iii. CNIYDTL (In Yard DTL)
iv. CNTLTRK (Transload to Truck)
v. CNTLLOC (Transload to Locomotive)
TDS support.
Truck Number: When applicable, the identifier of the associated truck.
minutes.
Seller ID: Your seller ID, a 3 digit identifier.
Consignee: Your consignee, a 14 digit identifier.
35