Rcu General Setup - Toptech MultiLoad II Mobile Installation Manual

Chapter 6 – MutliLoad Configuration
6.4 RCU G
ENERAL
Use the RCU General Setup function to:
- Specify the card reader type.
- Set processing mode.
- Enter information necessary for communicating with TDS.
Navigate to this screen as: Program Mode -> Configuration -> RCU General Setup
The RCU General Setup screen displays:
RCU Address is a data entry field. Press Enter and key in the appropriate address value. Then press Enter to
save the value.
Remote Processing is a toggle field. Use Next or Prev to highlight the appropriate filed. Press Enter to access
the field, then Next or Prev to change the setting. Press Enter to save the change.
Password is a data entry field. Press Enter and key in a new password. Press Enter to save the change.
MultiLoad II Mobile Installation Guide: Version C
S
ETUP

RCU GENERAL SETUP

RCU Address:
Card Reader Type:
Processing Mode:
Swing Arm Secondary:
Password #1:
Password #2:
Password #3:
Password #4:
Password #5:
Modem Dial:
Host Login: TDSTEST1TDSTEST1
Terminal SPLC: 123456001
Terminal Name: TDSTES1
Truck Number: T123456789
Next Prev
RCU GENERAL SETUP
RCU Address:
Card Reader Type:
Processing Mode:
Swing Arm Secondary:
Password #1:
Password #2:
Password #3:
Password #4:
Password #5:
Modem Dial:
Host Login: TDSTEST1TDSTEST1
Terminal SPLC: 123456001
Terminal Name: TDSTES1
Truck Number: T123456789
Enter
001
DISABLD
CN ALL
DISABLD
*******
*******
*******
*******
*******
Exit Enter
█
DISABLD
CN ALL
DISABLD
*******
*******
*******
*******
*******
Exit
33