Table of Contents
Advertisement
3.3 Event Playback
When you select the event playback mode, the system will analyze and mark videos that contain
the motion detection, line crossing detection, or intrusion detection information, .
Before You Start
● Ensure the camera has enabled Dual-VCA. You can enable it via the camera web browser
interface in Configuration → Video/Audio → Display Info. on Stream.
● Ensure your video recorder has enabled Save VCA Data. You can enable it in Configuration →
Record → Advanced.
Steps
1. Go to Playback.
2. Click Event.
3. Select a camera.
4. Position the cursor on playback window to show control bar.
Button
Network Video Recorder User Manual
Button
Figure 3-5 AcuSeek
Table 3-3 Button Description
Description
Add tag.
Description
videos that contain
human or vehicle
during playback.
Adjust image
display effect
according to the
screen size.
Multi-window
division playback.
Button
12
Butto
Description
n
If you have clicked
/ , you can
click
and
configure the
AcuSe
detection area to
ek( )
quickly search the
human/vehicle
information in this
area.
Description
Zoom in/out playback
Advertisement
Table of Contents
