Platform Access; Configure Ehome - HIKVISION DS-9600NI-I8 Series User Manual

2. Set protocol parameters.
Type
The network camera adopting custom protocol must support getting stream through
standard RTSP.
Path
Contact the manufacturer of network camera for the URL (Uniform Resource Locator) of
getting main stream and sub-stream.
Note
The protocol type and the transfer protocol must be supported by the network camera to add.
3. Click OK.
After adding the customized protocol, you can see it in Protocol.

1.5 Platform Access

1.5.1 Configure EHome

EHome protocol is non-open and push-mode protocol based on TCP/UDP, which can realize the
communication between the system and mobile devices (e.g., body camera, MNVR, etc.). The
system is as a server and you can register the device to the system. The protocol is suitable for the
application of dynamic device IP address.
Steps
1. Go to System → Network → Advanced → Platform Access .
Network Video Recorder User Manual
Figure 1-14 Protocol Management
13