AJAX ManualCallPoint Jeweller User Manual page 10

ManualCallPoint Jeweller user manual | Ajax Systems Support
If you've reached the maximum number of devices the hub can
support (
when attempting to add another device.
Once connected to the hub, the button will appear in the list of hub
devices in the Ajax app.
Malfunctions
When a malfunction is detected, the Ajax app displays a malfunction
counter on the device icon. All malfunctions are indicated in the
device's states. Fields with malfunctions will be highlighted in red.
A malfunction is displayed if:
no connection with the hub or radio signal range extender via
Jeweller;
the button battery is low.
Icons
The icons display some ManualCallPoint states. To access them:
https://support.ajax.systems/en/manuals/manualcallpoint-jew...&_ga=2.192918121.2138058382.1699352683-737267677.1699352682
depending on the hub model
ManualCallPoint works with one hub. When connected to a new hub, the
device stops sending events to the old one. Adding the button to a new
hub does not automatically remove it from the device list of the old hub.
This must be done through the Ajax app.
), you'll receive a notiTcation
07.11.23, 13:23
Страница 10 из 26