AJAX ManualCallPoint Jeweller User Manual page 9

ManualCallPoint Jeweller user manual | Ajax Systems Support
1. Install the
2. Create
to the app, adjust the necessary settings, and create at least one
virtual room
3. Ensure that the hub is switched on and has internet access via
Ethernet, Wi-Fi and/or mobile network.
4. Ensure that the hub is disarmed and does not start updating by
checking its status in the Ajax app.
Connecting to the hub
1. Open the
button.
2. Go to the Devices
3. Name the button, then scan or manually input the QR code
(located on the button and the package box). Next, select a
room and a group (if
4. Click Add.
5. Press the ManualCallPoint power button. Once the device is
added, the LED will fash once.
https://support.ajax.systems/en/manuals/manualcallpoint-jewe...&_ga=2.192918121.2138058382.1699352683-737267677.1699352682
Ajax app .
an account if you don't have one. Add a compatible hub
.
Ajax app and select the hub where you want to add the
tab and click Add device.
Group mode
When connecting ManualCallPoint via the
the button won't automatically switch between the radio networks of the
range extender and the hub. However, you can manually assign
ManualCallPoint to another hub or range extender in the app.
is enabled).
radio signal range extender
07.11.23, 13:23
,
Страница 9 из 26