Adding To The System - AJAX ManualCallPoint Jeweller User Manual

ManualCallPoint Jeweller user manual | Ajax Systems Support
name, security group, and virtual room. Note that the list of
transmitted parameters may vary depending on the CMS type and
the selected communication protocol for it.

Adding to the system

To connect ManualCallPoint to the hub, the device must be located
at the same secured facility as the system (within the range of the
hub radio network). When using
extender, Trst add the device to the hub, then connect it to ReX or
ReX 2 in the range extender settings.
Before adding a device
https://support.ajax.systems/en/manuals/manualcallpoint-jewe...&_ga=2.192918121.2138058382.1699352683-737267677.1699352682
The ID and the loop (zone) number of the device can be found in its
states in the Ajax app
ManualCallPoint is incompatible with
panels, or ocBridge Plus and uartBridge integration modules.
The hub and the device operating at different radio frequencies are
incompatible. The radio-frequency range of the device may vary by
region. We recommend purchasing and using Ajax devices in the same
region. You can verify the range of operating radio frequencies with the
technical support service
.
Hub , third-party security central
ReX or ReX 2
.
radio signal range
07.11.23, 13:23
Страница 8 из 26