Period Checks And Maintenance - Mase Generators IS 6.1 Use, Maintenance And Installation Manual

6.18 P
ERIOD CHECKS AND MAINTENANCE
Perform service at intervals indicated
Fuel system
Check the fuel level and refill
Remove sediment from fuel tank
Clean fuel filter
Replace the fuel filter element
Check the fuel injection nozzle
Check the fuel injection timing
Check the fuel injection pump
Lubrification system
Check the oil level
Replace the oil
Replace the oil filter element
Cooling system
Inspect exhaust system components
for cracks and corrosion (exhaust line,
hose clamps, silencer and outlet flapper)
Check function of siphon break
(if equipped)
Replace seawater pump impeller
Check condition of heat exchanger
anticorrosion zinc
Check thermostat function
Flush cooling system
Intake / Exhaust system
Check the air cleaner element
Replace air cleaner element
Check the air intake pipe
Check exhaust system
Clean exhaust/water mixing elbow
Electrical system
Check and tighten electrical connections
Clean battery cables
Check the electrolyte level in the battery
Engine and mounting
Check for leakage af water and oil
Retighten all major nuts and bolts
Check tightness of mounting bolts/
vibromounts
Check the belt-tension
Replace belt
Check and adjusting intake / exhaust
valve clearance
Remote control system, etc.
Check remote control operation
Test run generator set
○
In presence of this symbol it is possible to effect the technical support autonomously .
●
In presence of this symbol it is obligatory to effect the technical support in an our authorized retailer / workshop.

PERIOD CHECKS AND MAINTENANCE

Every 50 Every 100
Before
hrs.or 1
starting
Month
○
○
○
h
10
(Before
operation)
○
st
1 time
○
st
1 time
○
○
○
○
(thereafter)
○
○
○
(thereafter)
○
○
Every 200 Every 400
hrs.or 2 hrs.or 3 hrs.or
Month Month Yearly
○
○
●
●
○
○
○
○
○
○
○
○
○
●
○
●
○
(thereafter)
IS 6.1
Every 500 Every 800
hrs. hrs.
○
●
●
●
○
○
○
GB
GB
- 41