Seawater Pump Maintenance - Mase Generators IS 6.1 Use, Maintenance And Installation Manual

IS 6.1
6.12 S
EAWATER PUMP MAINTENANCE
GB
At least once a year check the integrity of the rubber
2
seawater pump impeller.
Before opening the seawater pump to inspect the
impeller, drain the seawater from the cooling system
1
as described in paragraph 6.12.
To access the impeller, remove the cover (ref.1) and
use pliers to extract the impeller (ref.2), pulling it hard
towards the outside.
To refit a new impeller, repeat the operations described
above working in reverse order.
GB
- 38