Water Quality Display; System Operation Modes - Ecosoft MO36000PECO Installer And User Manual

INSTALLER AND USER GUIDE FOR CROSS 90 DIRECT FLOW REVERSE OSMOSIS FILTER
5. USAGE

5.4 WATER QUALITY DISPLAY

Water quality
Excellent
Good
Bad

5.5 SYSTEM OPERATION MODES

Function Action logic
Buzzer beeps 0.1S, indicator
Power on
display 3S
Automatic flushing 5 mins
First time use
The user turns on the tap to
washing
go on running water for 30
minutes
1. CF filter cartridge:
automatic flushing for 5
minutes.
2. RO filter cartridge:
Washing for a
automatic flushing for 5
replacement
minutes, open the tap and
filter
flush for 30 minutes.
3. CB filter cartridge: open
the tap and flush for 15
minutes.
User takes
Water making action
water
The machine stops making
Standby water and goes into standby
mode.
The whole machine does
Fault
not work
This manual is the intellectual property of Ecosoft. Copying and reprinting is prohibited. © 2023
Tds range, ppm
< 100
≥ 100 and < 150
≥ 150
Replacement filter
lifetime indicator
status
Blue-Purple-Red
indicator light on 1S
Blue always lights
on
Blue always lights
on
Blue always lights
on
Always light on
(based on filter
lifetime display)
Always light on
(based on filter
lifetime display)
Water quality display
Permanent blue
Permanent violet
Permanent red
System indicator status
Blue-Purple-Red indicator
light on 1S
Red flashing
Flashing according to
current water quality
status
1. Water quality indicator
light red flashing when
flushing.
2. When opening the
faucet to flushing, the
water quality indicator will
be flashing according to
the current water quality.
Always light on accord-
ing to the current water
quality
Go out
See part 6.6
16