Change Of Water Flow Direction In The Filter; Filter Enhancement - Ecosoft AquaPoint FPV24520ECO User Manual

USER'S MANUAL. AQUAPOINT FILTER
3. INSTALLATION AND STARTUP

3.4. CHANGE OF WATER FLOW DIRECTION IN THE FILTER

The design of the filter provides possibility to change water flow direction to the opposite. In order
to perform this, it is necessary to:
1. Disconnect unions of pipelines.
2. Screw out 8 fixation screws of filters heads and switch their places preserving the direction of
the flow.
The procedure should be performed by a service center specialist.
Button to release air

3.5. FILTER ENHANCEMENT

The filter can be enhanced to the MAKE BETTER level by connection of additional water treatment
stages between the filters (see the installation scheme on page 7). For the connection please take
the following steps:
1. Disconnect unions from the back in the center.
2. Screw out the adaptor nipple (or leave it in one of the corners if you are planning to use it for
connection).
Union
Connect additional water treatment equipment between the filters. Any of the connection lines
can be directed up or down with the further turn to any side.
This manual is the intellectual property of Ecosoft. Copying and reprinting is prohibited. © 2018
OVERHEAD VIEW OF THE FILTER
Adaptor nipple
Button to release air
12