Reverse Osmosis Filter Indicators; Filter Installation; Before Commencing Installation - Ecosoft MO36000PECO Installer And User Manual

INSTALLER AND USER GUIDE FOR CROSS 90 DIRECT FLOW REVERSE OSMOSIS FILTER
2. SPECIFICATIONS AND COMPONENTS

2.4 REVERSE OSMOSIS FILTER INDICATORS

1 – System performance indicator - making water indication, water quality indication, faults
indication, flushing indication
2 – RO replacement filter lifetime indicator
3 – CB replacement filter lifetime indicator
4 – CF replacement filter lifetime indicator
5 – Faucet indicator - making water indication, faults indication, replacement indication, flushing
indication

3. FILTER INSTALLATION

Before installing a domestic reverse osmosis filter please carefully read this instruction.
This system must be installed in compliance with local codes.
For correct installation of the system, request one of the Ecosoft Authorised Service Centres.
The manufacturer is not responsible if the system was installed by an unqualified specialist

3.1 BEFORE COMMENCING INSTALLATION

1) Check that all parts are in the package. Do not open the plastic bags with filter parts before you
make sure everything is in place to be able to return faulty/incomplete package.
2) Check conformity of your local variables to requirements specifications:
Main pressure*
Check water pressure at mains before install-
ing the product. Compare to the requirements
in paragraph (2.1).
*Refer to paragraph 2.1 for recommended measures in case any of the above variables
does not meet the requirements.
This manual is the intellectual property of Ecosoft. Copying and reprinting is prohibited. © 2023
1
2
3
4
Supply water temperature*
Check temperature of supply water. Compare
to the requirements in paragraph (2.1).
7
5