Ecosoft MO36000PECO Installer And User Manual page 19

INSTALLER AND USER GUIDE FOR CROSS 90 DIRECT FLOW REVERSE OSMOSIS FILTER
6. SANITIZATION OF REVERSE OSMOSIS FILTER
• Pay special attention to sanitizing the faucet spout. Use the sanitizing spray (or, failing that,
hydrogen peroxide, dosing it in such a way that it penetrates the faucet spout) and single-use
blotting paper. Spray the spray on the faucet nozzle, rub the spout and faucet nozzle with the
disposable paper and do not touch it directly with your hands.
• Given that sanitization and rinsing do not ensure the complete removal of carbon dust from
new filters or sanitization residues, rinse the osmosis equipment with plenty of water, after each
sanitization, circulating mains water of adequate quality for 5 minutes or more. Discard the first 5
liters of water before consuming it.
• Remove sanitizing installation when disinfection is finished
• At the end, take a drying kitchen paper, dry all the parts that may have gotten wet and especially
the leak detection probe.
This manual is the intellectual property of Ecosoft. Copying and reprinting is prohibited. © 2023
19