Arrow CYC5000 User Manual page 53

5.2.12.3 The other pins need to be assigned as well. Just like previously set all the pins to their
appropriate locations using the table below, by either drag and drop or writing manually
the location.
5.2.12.4 Now the Pin Planner should look like this after assigning all the pin locations.
5.2.12.5 The specific pins are now selected, but the I/O standards now need to be set as well. The
button, LEDS, and clock pins are the same I/O standard for CYC5000 since all banks*
and peripherals are powered by 3.3V. The USER_BTN, the LEDs and clock pins are 3.3-V
LVTTL. These I/O standards can be set in the Pin Planner, by selecting the I/O Standard.
Select the I/O standard either from the "All Pins" tab or the "Groups" tab and change the
2.5V (default) to the specific I/O standard.
CYC5000 User Guide
Node Name Pin Location
LED[7]
PIN_K1
LED[6]
PIN_L1
LED[5]
PIN_T2
LED[4]
PIN_V2
LED[3]
PIN_N3
LED[2]
PIN_M3
LED[1]
PIN_M4
LED[0]
PIN_P4
USER_BTN PIN_L17
Page | 53
www.arrow.com
March 2023