Arrow CYC5000 User Manual page 32

Rather than entering the exact part number, the pull-down menus can be used to select
the correct family, package, pin count, and speed grade. Quartus Prime will use these
settings to compile the design, and also provide the programming file that you will use
later to program the device.
5.1.11 Click "Next".
5.1.12 EDA Tool Settings
In the EDA tool Settings window, disable any EDA tools, if there are any present. EDA tools
are third party tools that work with Quartus Prime for design entry, simulation,
verification, and board-level timing. For this tutorial, no EDA software will be used, as
only Quartus Prime will be used.
5.1.13 Click "Next".
5.1.14 Project Summary Page
This is the Summary Page that shows the settings Quartus Prime will use for this Project.
Those settings can be changed if required later.
CYC5000 User Guide
Page | 32
www.arrow.com
March 2023