Table of Contents
Advertisement
6.1.7
Make sure the hardware setup is Arrow-USB-Blaster [USB0] and the mode is JTAG. If the
Mode is not set to JTAG, click on it, and select JTAG from the drop-down menu.
6.1.8
To add the device, click "Auto Detect" on the left side of the Programmer.
6.1.9
Select 5CEBA2 device and click "OK" on the Select Device window.
6.1.10 To add programming file, double click <none> to choose programming file.
6.1.11
Navigate to <project_directory>/output_files/ in your compilation directory. Select and
open the top.sof file.
CYC5000 User Guide
Page | 59
www.arrow.com
March 2023
Advertisement
Table of Contents
