Adding The Components To The Schematic - Arrow CYC5000 User Manual

5.2.7 Adding the Components to the Schematic

The next step would be to connect all three components together.
5.2.7.1 To do so, select File menu, then click on New and select Block Diagram/Schematic File.
5.2.7.2 Click "OK".
A new schematic will be created, where the components can be added.
5.2.7.3 Right click on the schematic page and select Insert → Symbol... as seen below.
CYC5000 User Guide
Page | 41
www.arrow.com
March 2023